Installation techniques for lightweight hinges

2020-05-29

The hinge is connected to the door leaf. Measure downtwo hundredDraw the positioning line in millimeters, align the shorter side of the hinge with the line, and then align the longer side of the hinge with the opposite side of the door leaf. Draw the contour line of the hinge groove along the boundary of the hinge, and use a flat chisel to remove the hinge groove. It should be remembered that the hinge slot should be deep on the inside and shallow on the outside, and its depth should be consistent with the thickness of the hinge. This means that after installing the hinge, it should be flush with the slot. After removing the hinge slot, place the hinge and temporarily fix it with two screws.